#fusion360
This is Part 10 in the PCC (Piston Connecting Rod and Crankshaft). In this, we are going to assemble all the components. This video will give you insights on Fusion 360 assembly.
#autodeskadd #fusion360 #fusion360tutorial #assemblytutorial
Part9- • PISTON MODELING || PART-9 OF PCC ASSY #fus...
Download the Resources- https://drive.google.com/file/d/1Gw5C...
Playlist Link- • CRANKSHAFT 3D MODELING || PART-1 OF PCC ASSY
➡️Timestamp:
00:00 Intro
CRANKSHAFT
00:25 Getting Started
01:00 Insert bearing from McMaster Carr Component
01:58 Component color cycling Shift+N
02:33 Components from bodies
04:20 As Built Joint Bearing Inner and Outer Race
05:20 Joint Bearing and Crankshaft
06:40 Pinning Component
07:30 Copy Joint Bearing and Crankshaft
CONNECTING ROD
08:27 Rigind Joint/Group- Connecting Rod
09:58 Joint- Connecting Rod
PISTON
11:52 Joint- Piston
12:54 Piston Pin Modeling
15:00 Rigid Joint- Piston Pin
15:43 Insert circlip from McMaster Carr Component
17:00 Copy circlip and Joint
18:23 End
Tools Used:
McMaster Carr Component in the insert
Component color cycling (Shift+N)
Capture and Revert position
Joint (J)
As-built joint
Pinning Component
Rigid Joint
Move (M)
Copy and Paste component
Pin Component
Sketch
Extrude
Social Media:
/ world_of_fusion_