Ametek 7.2" Diameter Motor Brush Replacement | Kleen-Rite
Watch a technical sales engineer from Ametek change the brushes on a 7.2" diameter motor and a redesigned premier 7.2" model. Use his expert knowledge as a helpful guide when working on your vacuum motor! The first motor worked on is a model 115334, and the second is a model 117549-12.
7.2" Motor Brush Replacement:
0:00 Introduction
0:18 Check that Power is Disconnected
0:25 Remove Sideband
0:52 Remove Clamp
1:13 Remove Old Brush
1:42 Install New Brush
2:00 Reinstall Clamp
2:33 Reinstall Sideban and Heat Run at Half Voltage to Seat Brushes
Redesigned 7.2" Motor Brush Replacement:
3:48 Check that Power is Disconnected
3:51 Remove Clamp and Old Brush
4:33 Install New Brush and Clamp
5:11 Heat Run at Half Voltage to Seat Brushes
Shop all Ametek motors:
https://www.kleen-ritecorp.com/c-1168...
Shop Vacuum Motors and Replacement Parts:
https://www.kleen-ritecorp.com/c-1170...
Reach Kleen-Rite at 800-233-3873 or visit https://www.kleen-ritecorp.com!