Ametek 5.7" Diameter Motor Rotating Fan and Brush Replacement | Kleen-Rite
Watch a technical sales engineer from Ametek service a standard 5.7" diameter motor. In this video, he changes a rotating fan and replaces the brushes. Use his expert knowledge as a helpful guide when working on your vacuum motor!
Change Rotating Fan:
0:00 Introduction
0:10 Tools Used
0:47 Check That Power is Off and Remove Outer Fan Shell
1:16 Remove Nut, Washer, and Old Rotating Fan
1:50 Put on New Rotating Fan, Reapply Washer and Nut
2:19 Replace Outer Fan Shell
Replace Brushes:
2:40 Remove Flat Brass Terminal
3:30 Remove Clamp
3:43 Take Out Old Brush and Replace with New Brush
4:14 Reinstall Brush Clamp
4:53 Heat Run the Brushes
Shop all Ametek motors:
https://www.kleen-ritecorp.com/c-1168...
Shop Vacuum Motors and Replacement Parts:
https://www.kleen-ritecorp.com/c-1170...
Reach Kleen-Rite at 800-233-3873 or visit https://www.kleen-ritecorp.com!