Cogenerator Safety System
If you like the content I publish, you can support the channel. Thank you
Support using:
https://suppi.pl/szymonhawlicki Possibility of support via BLIK and 18 Banks
https://paypal.me/szymonhawlicki?coun... Direct transfer to PayPal account
https://tipply.pl/u/szymonhawlicki Possibility of support via BLIK, PayPal, PaySafeCard and others.
Thank you to anonymous and named people for supporting the channel 😁 thanks to you the channel remains independent 💪
Links to materials used in the film:
By using affiliate links you support the channel, thank you.
Microphone 🎙️ SYNCO G1 https://alii.pub/6mq47k
20x5 Fuse Base 🌋👮♂️ https://alii.pub/6qv9pg
5x20 Fuse 🛡️👮♂️🌋 https://alii.pub/6xcj0f
3x2.5mm DIN Rail Splitter + Accessories 3️⃣🔀🛤️➕ https://alii.pub/6zjruv
20x5 Fuse Base 🚨🌋👮♂️ https://alii.pub/7186o4
Power Rail Splitter 🔀🛤️ https://alii.pub/6t6d9f
Relay for narrow DIN rail 🛤️🔀💡 https://alii.pub/7186s0
In this episode, tests of the generator's "safety system", namely protection against: lack of oil / too low oil pressure during generator operation / "dry" start without adequate oil pressure.
The topic dragged on a lot because the engine stood for many months without starting and all the oil flowed into the pan and the pump "dried up", which is why I was unable to fill the pressure in the system.
Once I have the oil pressure, the pressure gauge, it's time to sew the safety system. It was not an easy matter because I did not foresee everything and I had to buy additional elements several times to complete all the necessary elements.
During the tests, it was necessary to change the concept several times, i.e. to secure the system in such a way as to secure the system as cheaply and with the least possible interference and, if necessary, to bypass the safety system in an emergency. In the next practical tests we will see how this solution works.
Timeline:
0:00 - 6:08 Test of the safe start and shutdown system
6:09 - 7:22 About the testing process
7:23 - 12:08 A little bit about the backstage of the project
Current episode made using:
Synco - G1L - microphone
IPhone 8 - Audio and video
Editing - iPad 9
Thank you very much @Kenny88 for creating a trailer for my channel 💪
This is not an instructional guide so please do not imitate, I make many mistakes that can cost life or health, it is recommended to have the work done by a qualified specialist.