Outdoor decor idea - DIY Folding Chair with metal frame
Outdoor decor idea - DIY Folding Chair with metal frame
Hi there In this video i will show
How to make a Folding Chair with metal frame (without welding) step by step - tutorial
I hope you like it
For this project you need
(25mm)Metal Square pipe
( 95cm - 2pcs ) (70cm - 2 pcs ) ( 35cm - 2pcs)
( 40cm - 2pcs ) ( 29cm - 1pcs )
SS Carriage Bolt ( 1/4 Size 2.5" Length - 4 pcs ) With Washer And Locknut
Hex Bolt 6mm Size And 40mm Length - 6pcs
Screw 3/16 Size 1" Length
And wooden boards
00:00 Video started
00:02 Short review
00:11 Let's make this folding chair
00:13 all information at the end of the video
00:14 start with the frame of the chair
00:18 making marks and drilling holes
00:36 hammer the wooden cubes into profile
00:46 make holes in wood
00:56 carefully sand the surface
01:03 Clean metal using acetone solvent
01:12 assemble the frame as shown in the video
01:51 Drill holes in the board and fasten the back of the chair first
02:35 adjust the position of the seat before fixing
02:39 the position of the seat is fixed with two pipes as shown in the video
03:03 cut off excess corners
03:25 reinforces the structure of the support area
03:39 make markings on the legs as I showed
03:50 cut the legs of the chair at an angle
04:06 cut off the protruding ends of the bolts
04:15 sand all sharp corners
04:23 fasten the boards of the seat
05:00 painting the metal frame
05:08 I treated the boards with stain and then varnished
05:20 The chair is ready to enjoy the result
05:37 useful information
05:44 thanks for watching don't forget to subscribe, repost and like
#diy #Folding #Chair #ardodiy