Muxlab 500800 KVM HDMI over IP PoE Extender
Find it at Markertek! https://bit.ly/3r5wwXP
The KVM HDMI over IP PoE Extender, 4K@60 allows HDMI & USB equipment to be connected up to 330ft (100m) over an Ethernet LAN, supports HDMI up to 4K @ 60Hz (4:4:4) via Cat5e/6 cable in multiple point-to-point and point-to-multipoint configurations. The Transmitter (500800-TX) and Receiver (500800-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.
The Transmitter terminates to a computer server/workstation via an HDMI & USB port, The Receiver terminates to an HDMI display and up to 4 USB devices such as a keyboard, mouse, printer, drawing pad, storage device, camera, etc., via a 4 port USB hub. A single Receiver can be switched via hotkey sequences to any Transmitter on the network, allowing a single operator to manage numerous servers/workstations, in a distributed KVM application.
Applications:
Management of multi-server systems supporting HDMI displays in IT departments within corporations educational institutions
CAD Design
Graphic Design
Media Servers
Data Centers
Features:
One operator can manage multiple servers/workstations
Supports HDMI up to 4K @ 60Hz (4:4:4)
Receiver side includes a 4-port USB hub, for KVM applications
Up to 330ft (100m) over Cat5e/6
Supports 100's of Transmitters & Receivers depending on network bandwidth
Supports multiple point-to-point, and point-to-multipoint applications
Supports HDR
PoE powered
Supports audio insert & audio output (TX), and audio extract & mic-in (RX)
Specifications:
Environment: HDMI 2.0
Devices: Computers and servers withHDMI monitor ports.
Transmission: Transparent to the user
Bandwidth (HDMI): 597MHz
Signals: HDMI 2.0 protocol, HDCP 1.4, HDCP 2.2
HDR: Color HDR10 & Dolby Vision
Connectors: Note: Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
Two (2) 3.5mm jacks for audio-in and audio-out (on TX)/audio-out and Mic-In (on RX).
One (1) 3.5mm jack for directional Infrared port.
One (1) DB9 for RS232
One (1) 2.1mm locking barrel jack for power
One (1) or Four (4) USB Connector(s)for Host (on TX)/Client (on RX)
Four (4) DIP Switches for device ID addressing.
Maximum Distance Based on a maximum length of 6.6ft (2m) of HDMI cable per end: Cat5e/6: 330ft(100m) up to 4K @ 60Hz (4:4:4) Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
Latency: Typical one (1) Frame (16ms), maximum 2 frames (33ms)
Compression: JPEG 2000
Bandwidth: Up to 850 Mbps
Network Requirement: 1000BaseT with PoE
RJ45 Pin Configuration - Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight through wiring.
RJ45 Link:
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable: One (1) Cat 5e/6 or better twisted pair cables required
Power Source: This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
PoE: Standard IEEE 802.3af
Power Consumption:
Transmitter: 6 Watt
Receiver: 8 Watt
Operating Temperature: 32° to 104°F (0°to 40°C)
Storage Temperature: -4° to 185°F (-20°to 85°C)
Humidity: Up to 95% non-condensing
Dimensions: 6.38 x 5.51 x 1" (162 x 140 x 25mm)
Weight: 1.5Lbs (0.68kg)
Compliance: Regulatory: FCC, CE, RoHS Flammability: 94V0