Soldering station T12 🔥 do it yourself 💡
DIY Soldering Station 🔥 made with Arduino Nano.
Video 1 of 2.
As a soldering iron, one compatible with T12 type tips was used.
To make this project, a lot of familiarity is required.
In addition, for a good calibration, a thermometer is needed to measure the actual temperature of the soldering tip.
Link to the original project where you can find all the documentation:
https://github.com/wagiminator/ATmega...
You can find my modified Arduino file in my Discord channel: / discord
Materials:
🔸 Arduino Nano: https://s.click.aliexpress.com/e/_DeM...
🔸 MP1582 step down DC/DC: https://s.click.aliexpress.com/e/_Dla...
🔸 Oled SSD1306 display: https://s.click.aliexpress.com/e/_DEx...
🔸 Encoder with button: https://s.click.aliexpress.com/e/_Deh...
🔸 T12 soldering iron: https://s.click.aliexpress.com/e/_DFw...
🔸 T12 Tips: https://s.click.aliexpress.com/e/_Dko...
🔸 Piezo Buzzer: https://s.click.aliexpress.com/e/_DED...
Chapters:
00:00 Introduction
05:57 Circuit Diagram
10:15 T12 Tips
11:27 Components on Breadboard
11:50 Schematic Changes
13:13 Test Operation
14:30 Temperature Calibration
_____________________________________________________________________________________________
License: CC BY-SA 4.0
DISCLAIMER:
All projects are created for hobby purposes, and may not be tested and/or contain errors. It is up to the user to verify everything. I am therefore not responsible for damage caused to people or things or simply to the projects themselves, resulting from improper and incorrect use.
Don't work beyond your capabilities and always seek professional advice if you are unsure of what you are doing.
Remember: Safety first!