3D ASA / ABS Print Guide for Beginner In Hot Climate
This is for newbie who wanted to print ASA / ABS with success. Default settings may work for some country, but for hot weather country , the settings need to be tweak. For me in ASIA, the best setting is
1st- heat up bed temp 100C to 110C until you see the chamber temperature reach 48C (Minimum)
2nd- Once your chamber reach 48C-55C , your nozzle setting need to lower abit to prevent over heat which cause the filament to melt and oozing out before print. If it does oozing out, that noodle will bring along your 1st - 4th layer print and pull it out and you will get FAILED print.
3- Always standby and check until the 4th Layer. Once there is no warping on 4th layer, the rest print is successful.
music by : [No-Copyright Music] Inspiration / Epic Background Music for Video by MaxKoMusic