22+ GR86/BRZ: VLAND Tail Lights + AlphaRex Trunk Light
Just a quick overview video of the VLAND tail lamps paired with the AlphaRex LED Trunk Light
Personally, love this combination, and the OEM+ styling of the VLAND tails in RED
Overview:
Top Tail Light Mount Bracket:
What hardware did I need?
The only thing I had to get were new mounting screws (Size 6 1/2 ) for the top OE tail light bracket
Why?
The oem T20 torx screws were too small and did not hold the OE bracket in place for the VLAND tails
VLAND (JDM Wiring vs USDM) *Only needed if you did not receive the jumper harness for USDM.
If you received the jumper harness, like I did, you will not have to swap the green/yellow pins
Earlier versions of the VLANDs come with with jdm wiring. So when connected to USDM connector, and you turn on your lights, the following behavior will occur on the VLAND tails
1) Brake lights will function correctly
2) Running Lights will not come on
3) Turn signal light illuminates (amber)
4) When using turn signals/hyperflashes side marker within tail light
Hopefully this video will give you a better idea to confirm if you have the correct wiring or not and re-pin if needed
0:00 Intro
0:30 VLAND. Seller/Pricing
0:44 New screws for mounting bracket
1:20 Jumper harness for USDM models
1:49 Example if harness is NOT connected
2:16 (De-pin) Swap green/yellow pins if needed
2:49 OEM Tails
3:20 OEM vs VLAND
3:48 VLAND (Bootup Sequence + Sequential Flashers)
4:17 VLAND. Default demo (out the box)
4:41 Closing thoughts
5:17 End