Micro Servo Control Using Arduino Uno Board
Hi guys, here you will learn how to make code servos and you will also know the application of Arduino Uno Board.
The components you needed are as follows:
1. Arduino Uno Board
2. PCB
3. Battery (9V)
4. Jumper Wire
5. Micro Servos (4 piece)
Connections:
—The external battery VCC / GND connects to the breadboard.
—The Arduino GND connects to the breadboard’s GND input.
The servo connections we use in this project are as follows:
Orange/Yellow Input – Signal Input
Red Input – Power Input (VCC)
Brown/Black Input – Ground Input
—The Servo1 VCC and GND connects to the breadboard’s VCC and GND inputs
—The Servo1 Signal connects to the Arduino Digital PWM 3
—The Servo2 VCC and GND connects to the breadboard’s VCC and GND inputs
—The Servo2 Signal connects to the Arduino Digital PWM 5
—The Servo3 VCC and GND connects to the breadboard’s VCC and GND inputs
—The Servo3 Signal connects to the Arduino Digital PWM 6
—The Servo4 VCC and GND connects to the breadboard’s VCC and GND inputs
—The Servo4 Signal connects to the Arduino Digital PWM 9
And here your connections are complete.
Coding is given in the video. It is not given in the description you can code it by your own it's very simple. You can also use more servos.