Fusion 360 From Zero | DRAFT - Taper Angle Feature Tutorial #15
2D Sketch : https://www.3dmechanism.com/post/3d-e...
In this tutorial we'll use the features:
Extrude with taper angle (Draft): Pushes a flat 2D sketch into a 3D solid while angling the walls slightly inward or outward. In manufacturing, this angle is called "draft" and is required so the part can easily pop out of a steel mold.
Shell: Hollows out the inside of that drafted solid block from a selected face, leaving a perfectly uniform wall thickness.
Shell: Hollows out the entire part from the bottom, leaving a perfectly uniform wall thickness so the plastic won't warp during injection molding.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On:
Instagram : / engbcruz
YouTube: / @cadcamhub
#Education
#Fusion360
#Fusion360tutorial
#cad