How to Build a Tiny House on Contoured Land – Tiny Home Tips
#tinyhometour #tinyhouse #tinyhousebuild
EXTERIOR
This tiny house is quite unique because there are several interesting things here. The first thing is that in terms of land conditions, this tiny house is on land that is contoured and quite steep, so it needs to be engineered with its own sub structure to adapt to the slope of the contour.
STEP 1
The first step in making it is to determine the foundation points on the land first as in this video. For foundation depth, you definitely need a soil test first to determine the required foundation depth
STEP 2
The second step is to make structural reinforcement in the form of bracing with a conventional steel frame with specifications and sizes that comply with standards. You can consult with your nearest steel expert to determine the dimensions of each steel column to steel beams
STEP 3
The third step is to assemble the steel main beams according to standard sizes determined by experts based on calculations. Arrange the positions of the steel beams according to the positions of the space where the steel beams need to be reinforced
STEP 4
The fourth step is to arrange the subsidiary beams which are superimposed on the main steel beam
STEP 5
The fifth step is to arrange the floor plate support frame, position the frame on top of the tiller beams that have been arranged previously
STEP 6
after that make the wall frame on the wall placement plan that has been determined
STEP 7
The seventh step is to install the plywood inside the entire wall and the top surface
STEP 8
The eighth step is to fill each frame module except for the window and door opening positions with insulation. This is needed to reduce noise, reduce hot and cold temperatures from outside the room, so that the insulation is still able to adapt to extreme conditions outside the room.
STEP 9
after that, for the ninth step is to cover the plywood layer on the outer area of the building wall
STEP 10
After that, arrange the elements of doors, windows and other openings according to the positions specified in the design or building plan
STEP 11
The next step is to make roof elements on all building units with a roof sloping on one side towards the rear which is reinforced with a steel frame as in this video
STEP 12
The next step is to arrange the stair elements according to the elevation between the land and the building floor elevation