Creality CR-5 Pro fully modified
Love my content ❤️? Fuel my creativity with a coffee! ☕ https://buymeacoffee.com/dothediy
check my downloadable mods available @
https://cults3d.com/en/3d-model/tool/...
cr-5 Pro running Klipper
Hardware Used
-SHT-36 V2.0 CAN toolhead
-BTT SKR Pico controller
-CAN transceiver SN65HVD230
-Orbiter 2.0 extruder
-Pi 4 8GB
-OV5640 camera to monitor printer.
-Pei and Carbon fiber printer bed sheet
-4.3 inch DSI touch display
-Bambu Lab X1 Full metal hotend
-RGB strip in toolhead auto controlled via klipper to show hotend temperature state
-RGB strip in case controlled via klipper screen
-Using sensor-less homing for x and y axis
-BL-Touch added, mounted behind the toolhead, pro version does not come with BL-Touch pre-installed.
-All fans including hotend controlled via klipper, zero noise when printer is idle all fans switched off before or after the print.
-fan cooler for x axis stepper (also controlled by klipper) and heatsink for y axis stepper.
-Using existing extruder motor for y axis as it is more beefier
-Custom filament holder mounted above printer.
3mm inner diameter reverse Boden tube.
with additional 3d mods
Custom head design
Custom high flow 360 air duct
X and Y axis belt tensioner