How to replace Elegoo Saturn 3/ Saturn 3 Ultra/ Saturn 4/Saturn 4 Ultra LCD screen?
Here is a guide video for replacing Elegoo Saturn 3 Ultra LCD screen.
Easy to get done, and make your printer refresh!
For more tutorials, updates, and support, please visit our official social media or contact our service team.
Official Subreddit: / chitusystemsofficial
Facebook User Group: / chitusystems
Support email: [email protected]
0:05 Loosen and remove the 4 screws on the bottom and middle board
0:08 Slightly open the front cover
0:10 Unplug the cable from the touchscreen and LCD screen
0:14 Unbuckle from the right side
0:17 Tear off the masking tape
0:21 Unplug the fan, motor and limit plugs from the motherboard
0:34 Remove the whole center panel
0:36 Slowly push out the original screen from bottom
0:38 Spraying alcohol makes the glue easier to remove
0:40 Put the cable through the gap first, and then place the screen down
0:49 Apply masking tape to the edge and place the holes for the screws
0:56 Install the whole center panel
0:58 Connect the cables and install the buckle black
1:16 Install front cover plate
1:19 Screw in all the screws