Quick Tips! | How to Setup a Pull-up Banner | Extreme Marquees
Watch our Quick Tip Instructions on how to setup and pack down your Extreme Marquees Pull-up Banner!
📃 STEP BY STEP INSTRUCTIONS
Step 1: Remove your pull-up banner from the protective cover
Step 2: Remove the L-Pin from the side of the frame
Step 3: Remove the pole and twist the banner feet around to be facing outward
Step 4: Assemble the centre pole and put it through the hole and on top of the notch
Step 5: Place your foot on the banner foot plate and roll the banner upwards
Step 6: Place the top of the banner on the top of the pole nook
💡 TOP TIPS!
Make sure you remove the L-pin from the side, as pulling the banner out without doing so may break the banner!
Once you have removed the L-pin, you no longer need it (even when it is packed away!)
Placing you foot on the foot plate whilst opening the banner will help it roll out better!
When packing down, make sure the banner fabric is even whilst doing so, as the banner may pull on the sides.
► PULL-UP BANNER SPECIFICATION SHEET: https://www.extreme-marquees.com.au/b...
► CHECK OUT OUR PROMOTIONAL SIGNAGE AND DISPLAY RANGE: https://www.extreme-marquees.com.au/b...
Need more help?
AUS: Call us on 1800 850 832 or email [email protected]
NZ: Call us on 0800 424 313 or email [email protected]