Techspray FAQ: When Is Conformal Coating Necessary?
Whether or not conformal coating is required depends on the environment the electronic device will operate in, the reliability requirement of the device, and the cost of failure, whether in dollars or human lives. Devices operating in harsh environments may require coating, and the type of stresses and contamination will point to the best option, whether that is acrylic resin (AR), silicone resin (SR), urethane resin (UR), or some other type of protection. Aviation, aerospace, and medical devices often require coating because of their mission critical nature.
-------------
https://www.techspray.com/conformal-c...
PROTECT ELECTRONICS FROM EXTREME ENVIRONMENTS
Techspray offers SR, AR and UR conformal coating formulas for a wide variety engineering requirements including thermal, moisture & static resistance. All coatings are IPC-CC-830B and UL94 V-0 qualified.
Techspray offers a variety of conformal coating formulas for differing field or engineering requirements and is IPC CC 830B and UL94-0 Qualified or rated. Specifications generally depend on the type of protection needed: e.g., thermal, moisture, or static resistance.
Coatings contain Opti/Scan (except LED Coating) to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can be passed under a standard, low-cost UV (short-wave black) light to fluoresce the coated areas. The brighter the glow, the thicker the coating.
Application methods:
Dip – High volume method to fully coat boards. Thickness of the final coating is controlled by viscosity and withdrawal speed from the pot.
Conformal Coating Spray – Computer controlled selective spray systems eliminate the need for masking. Higher viscosity is generally needed (70-200 cps) to create precise edge definition and prevent splattering.
Manual Application – Aerosol and brushing are generally used for small production runs, rework and repair. The aerosol needs to be compatible with the original coating if it’s rework.
-------------
https://www.techspray.com
Techspray is a leading manufacturer of chemical products and soldering tools for the electronics industry. Techspray formulates, blends, and packages a wide variety of chemicals and assorted support products for the electronics industry, aerospace, heavy industry, and plant and equipment maintenance including degreasers, contact cleaners, flux removers, dusters, conformal coating, solder mask, water-based cleaners, desoldering wick, soldering tips, and the popular Plato shear cutters. More information can be found at techspray.com.