Yocto Tutorial - 01 Flashing Yocto Built Custom Linux OS onto BeagleBone Black (STEP-BY-STEP!!)
In this video, we will learn step-by-step how to flash a custom-built Yocto OS onto your BeagleBone Black board.
We will start by identifying the image file we need to use and the required hardware, including a BeagleBone Black, micro-SD card, an SD card reader, an FTDI cable, and a 5V power supply. Next, we will discuss the different flash tools available, including dd and Etcher.
We will then walk through the steps to flash the BeagleBone Black with Etcher, including downloading and installing Etcher, flashing the Yocto-Image on SD card using Etcher.
After flashing the BeagleBone Black, we will discuss how to connect it to the serial console using an FTDI cable and verify the connection. We will then walk through the steps to boot the BeagleBone Black and check the image, including checking the kernel version, seeing the partitions, and checking the rootfs folders.
https://github.com/Munawar-git/YoctoT...
Beaglebone Black: https://grabcad.com/library/beaglebon...
FTDI Cable (Serial to USB): https://raw.githubusercontent.com/guy... https://microcontrollerslab.com/wp-co...
Etcher: https://www.balena.io/etcher