SNOWMOD RC - ELEMENT RC METAL PANHARD INSTALLATION
Today we are at the bench upgrading our Element Sendero to the all metal upper panhard mount that is now featured on the Element Gatekeeper. Enjoy! And dont forget to LIKE and SUB to stay up-to-date! Below is a link to the new panhard mount from Element RC, as well as a list of hardware needed.
ELEMENT RC PART NUMBER: 42255
Element RC:
https://www.associatedelectrics.com/e...
AMain Hobbies:
https://www.amainhobbies.com/element-...
REQUIRED HARDWARE(not included):
-(2)M3x8 screws(Tapered head)
-(2)M3x8 screws(Button head)
-(1)M3x16 screw(Button head)(*if not already equipped*)
-(2)M3 locknuts
RECOMMENDED TOOLS:
-Dremel Cutting Wheel
-Dremel Sanding Drum
-Pencil/Sharpie
-2mm allen/hex driver
-7/64 or 3mm drill bit and drill