Servo Motor: DIY Smoother Speed Control MOD
You upgraded your sewing machine to the latest and greatest servo motor and found that your new motor is hard to control unless you set the top speed to a low setting. Then when you need or want to go fast you have to reach under the table and set the motor to a faster speed and then change the speed again to sew critical areas.
This MOD allows you to have both slow speed control and high speed at the same time without needing to access the digital control panel of the servo motor.
You can also customize the ramp time between slow and fast speed and set it to your sewing skill. Those new to sewing will most likely want a longer smoother ramp time between slow and fast speed, whereas someone that is used to sewing with a clutch motor will probably want a faster ramp time.
All this can be done with a small piece of paper, a pencil, some tape, and a little experimentation (patience).
If you have questions after watching the video more info and photos of how to do the MOD are available on our website.
http://www.swflholsters.com/358/sewin...
Servo Motor: Updated Speed Mod
• Servo Motor: Updated Speed Mod
Disclaimer: Even though this is a very simple MOD if you feel uncomfortable or not exactly sure about what you are doing I highly recommend you find help. You assume all responsibility for any problems or damages you may have resulting from these instructions. I cannot and will not be responsible for you or your equipment.
Website: http://www.SWFLholsters.com/
Facebook: / swflholsters
Twitter: / swflholsters