Project Drag Slash | Custom Build
Learn More: http://www.traxxas.com/news/custom-dr...
Model/Parts Used:
Slash VXL w/On-Board Audio
http://www.traxxas.com/products/model...
or
http://www.traxxas.com/products/model...
Funny Car Wheels/Tires (rear)
http://www.traxxas.com/products/parts...
Front Wheels
http://www.traxxas.com/products/parts...
Stub Axles (rear)
http://www.traxxas.com/products/parts...
Tires, street slicks (front)
http://www.traxxas.com/products/parts...
Suspension arms (front)
http://www.traxxas.com/products/parts...
Suspension arms (rear)
http://www.traxxas.com/products/parts...
Bandit Camber Links
http://www.traxxas.com/products/parts...
Bandit Half-shaft axles
http://www.traxxas.com/products/parts...
Turnbuckles, toe-links
http://www.traxxas.com/products/parts...
Front bumper
http://www.traxxas.com/products/parts...
Wheelie bar assembly
http://www.traxxas.com/products/parts...
Button-head screws (3x20mm)
http://www.traxxas.com/products/parts...
Shock Rebuild Kit
http://www.traxxas.com/products/parts...
Front Axles
http://www.traxxas.com/products/parts...
Suspension Pin Set
http://www.traxxas.com/products/parts...
Button-head screws (3x25mm)
http://www.traxxas.com/products/parts...
Lock nuts (3mm)
http://www.traxxas.com/products/parts...
Double-sided adhesive (for OBA sound module)
http://www.traxxas.com/products/parts...
Blue Aluminum Wheels for Wheelie Bar
http://www.traxxas.com/products/parts...
Shoulder screws
http://www.traxxas.com/products/parts...
Aftermarket Parts:
14mm Wheel Hexes (needed if using #6968 Funny Car wheels)
Compatible RC body:
http://parmapse.shptron.com/p/68-musc...
http://parmapse.shptron.com/p/69-r-t-...
http://parmapse.shptron.com/p/65-musc...
Magnetic Body Mounting Kit
http://www.prolineracing.com/accessor...
Tools Used:
-1.5mm, 2mm, & 2.5mm hex tools
5.5mm & 7mm nut drivers
Needle nose pliers
Hobby knife
Electric drill
2mm, 2.5mm, & 1/8in drill bits
Body reamer
RC body paint
RC tire glue
All-purpose cleaner
-4mm wrench
Small flathead screwdriver
Side cutters
RC body scissors (curved & straight)
U-joint wrench
Sheet of paper (for painting)
Permanent marker (to mark position for OBA speakers)
Table vise
Dremel tool with cutting disk and sanding drum
Microfiber cloth
Safety glasses
Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.