DIY Modular Filament Drawer System
Eversince I saw Robert Cowan’s design on printable I knew I wanted to implement these in my setup.
#ad Thanks to PCBWay for making my beautiful design possible !! (https://www.pcbway.com)
I ran into two problems with his design:I could not fit two next to each other in my Ikea Lack setup and it does not fit the Bambulab P1P printed. Instead of looking for a remix someone else did I decided to redesign it all to fit my needs.
I think I succeeded and love the result. it took me a bit longer than I expected because of the huge size difference with the original. Because of the maximum width of the drawer I had to lower the rails and therefore nothing of the original design could be reused.
The design I made will be available on Makerworld.com.
Hope you like it !!
Print this in ABS and don’t hold out on strength or infill.
This is for the people that do not have a lot of spools but do want to have a nice storage system in a small place.
Be aware that the rails are about 15 - 20 euro’s per pair.
Links:
Modular Filament Drawer System
https://makerworld.com/en/models/476512
(Bambulab Friendly - Ikea Lack size)
Original Modular Filament Drawer from Robert Cowan
https://www.printables.com/model/7884...
Robert Cowan’s Youtube channel:
/ @robertcowandiy
BOM:
GTV Touch Pro sliderails
https://amzn.to/4aCgGox
M3.5 x 8mm (14x + 4x when interconnecting)
M3.5 16mm screws (16x)
https://s.click.aliexpress.com/e/_DC7...
PVC pipe 3/4” length depends on how deep you want your drawer to be. I used 53 cm.
hope you like the video, if you do pls like and subscribe or support me on patreon so i can continue in making these video's.
Support me:
Patreon: / lickylauda
Paypal: https://paypal.me/lickylauda
Buy me a coffee: https://www.buymeacoffee.com/lickylauda
If you want to support me in any other way, please reach out to me by mail.
I am always looking to review new products and am still looking for a filament sponsor.
Chapters:
0:00 Intro
0:10 Sponsor
0:14 My Inspiration
0:30 Size Difference
0:50 Redesign results
1:04 Visual Differences
1:28 Printing the parts
2:12 Sponsor
2:27 Assemble the parts
5:57 Clearing out the old drawers
6:43 Installing the new drawers
7:58 Testing the sliders8:11 Installing a shelf
8:52 Final results
9:05 Patrons
9:10 Credits