HEAVY DUTY SEWING POWER
HEAVY DUTY SEWING POWER
IN THIS VIDEO WE ARE GOING TO COVER A LOT.
00:00 INTRO - HI THERE! IN THIS VIDEO WE ARE GOING TO COVER A LOT OF GROUND.
WE WILL:
CHANGE THE NEEDLE.
CHANGE TO THE ZIPPER FOOT.
INSTALL BOBBIN.
PAIR THREADS FOR SEWING.
SHOW THE FEED DOG ADJUSTER.
DISPLAY THE INCLUDED ACCESSORIES.
DO A SEWING TEST ON DENIM.
01:20 THANK YOU FOR VIEWING. THIS IS THE END OF THE INTRO; ENJOY THE REST OF THIS INFORMATIVE VIDEO!
07:40 THERE IS OUR PEDAL. REMOVING THE PEDAL FROM THE WRAPPING.
08:00 INSTRUCTIONS ON PLUGGING IN & POWERING ON.
08:35 THE TENSION CONTROL DIAL: SET AT #4.
THE NEEDLE POSITION DIAL, SET TO CENTRE.
THE STITCH LENGTH DIAL. SET TO 3.5.
STITCH MODE DIAL AT DEFAULT.
12:25 FEED DOG DROP DOWN ADJUSTER.
13:15 READY TO START THREADING.
13:30 THE BOX OF PRE-LOADED BOBBINS.
14:10 INSTALL BOBBIN.
14:30 INSPECTING THE ACCESSORIES.
16:55 THE VERTICAL SPOOL PIN IS INSTALLED AND I AM USING A BOBBIN OF BLACK THREAD AS THE NEEDLE THREAD.
17:30 THE THREAD IS SEATED IN THE #2 GUIDE.
17:55 MOVING THE THREAD FROM #4 UP TO #5 THE THREAD TAKE-UP LEVER.
THE THREAD IS SEATED IN THE TAKE-UP LEVER AND I PULL IT DOWN TOWARDS THE 2 BOTTOM GUIDES & NEEDLE EYE.
18:45 CHANGING FROM THE 15 X 1 14 GA NEEDLE TO THE 16 GA NEEDLE. THE DENIM/JEANS NEEDLES.
19:30 USING THE ACCESSORY SCREWDRIVER THAT CAME WITH MACHINE TO LOOSEN THE NEEDLE CLAMP.
21:00 INSTALL #16 DENIM NEEDLE.
21:30 THE FLAT SIDE OF THE NEEDLE GOES TOWARD THE BACK. IF THERE IS RESISTANCE OR JAMMING, IT IS NOT CORRECT. IT SHOULD GO IN NICE & SMOOTH.
21:50 TRYING TO THREAD THE NEEDLE.
22:50 THE NEEDLE IS THREADED. TIME TO CATCH THE BOBBIN THREAD.
23:05 THE MACHINE IS THREADED & READY FOR SEWING.
23:20 WHAT WE HAVE ACCOMPLISHED SO FAR!
24:05 CHANGING TO THE ZIPPER FOOT.
25:40 THE ZIPPER FOOT IS NOW ON!
26:50 START SEWING TESTS.
30:10 THANK YOU FOR VIEWING. STAY SAFE, HAVE FUN! ADIOS AMIGOS!