MartinLogan Statement 40XW Installation Guide Part 2
This guide is Part 2 of 2 for the MartinLogan Statement 40XW.
Check out the Statement 40XW here: https://martinlogan.com/en/product/st...
In this video we will illustrate the necessary steps to complete the final portion of the Statement 40XW installation process.
The printed instructions can be found on the Statement 40XW product page: https://www.martinlogan.com/uploads/d...
Installation Instructions Part 2 :
Introduction: 00:00
Before You Begin Part 2: 00:20
STEP 16: DRIVER ASSEMBLY INSTALLATION PREPARATION
Step 16A – Removing the brackets: 00:39
Step 16B - Remove the positioning board: 01:11
STEP 17: ATTACH TRIM PIECES
Step 17A - Sanding sheetrock mud buildup: 01:24
Step 17BC - Applying the trim pieces: 01:33
STEP 18: MOUNTING THE DRIVER ASSEMBLY
Step 18AB - Seating the driver assembly: 02:09
Step 18C - Securing the driver assembly Part 1: 02:32
Step 18DE - Removing the handles/baffle protector: 02:52
STEP 19: SECURING THE DRIVER ASSEMBLY
Step 19A - Securing the driver assembly Part 2: 03:01
Step 19B - Inserting the brass screws: 03:16
Step 19C - Front binding posts explained: 03:40
STEP 20: ATTACH THE FRONT BAFFLE TRIM
Step 20A - Installing the baffle trim: 03:50
STEP 21 (OPTIONAL): APPLY THE LOGO BADGE
Step 21A - Applying the logo: 03:56
STEP 22 (OPTIONAL): APPLY THE SPEAKER GRILLE
Step 22A - Attaching the grille: 04:11
WRAP UP: 04:20
ADDITIONAL RESOURCES: 04:34