How to use a Singer sewing and embroidery machine: How to make it work for you with ease, 100% gu...
Fixing a very serious and widespread sewing machine problem in a very easy way.
I took it out and made it work perfectly and turned it on.
Singer sewing machine maintenance
Singer sewing machine
Singer sewing machine
Singer sewing machine
Machine
Singer
Make your machine like new again
Singer sewing machine problems and solutions
Repairing small sewing machines
Brother sewing machine service center
Singer sewing machine maintenance in Cairo
Singer sewing machine service center
Sewing machine maintenance courses
Singer sewing machine malfunctions
Singer sewing machine maintenance in Nasr City
Singer sewing and embroidery machine maintenance
Singer sewing machine repair locations
Sewing machine maintenance courses
Singer sewing machine problems and solutions
Singer sewing machine malfunctions
Singer sewing machine maintenance in Nasr City
Singer sewing machine maintenance in Cairo
Singer sewing machine cutting thread
How to repair the bobbin case step by step for using a Singer model 247 machine.
For those who have lost the instruction manual or need a little help working with their machines.
Wait, there will be more posts about other models and brands... Machine Knowledge
Light
Tension dial
Tension limiter
Needle catcher
Needle
Needle plate
Bend
Sliding plate
Shuttle case
Propulsors or teeth
Sneaker
Screw foot
Foot guides
Thread tension spring
Thread tensioner
Presser foot pressure regulator
Foot guide
Stitch width limiter
Needle position limiter
Spool holder
Shuttle winder assembly
Handwheel
Stitch length limiter
Rewind point drive button
Thread pass
Place the bobbin on the pin.
Continue turning the handwheel until the needle appears, and with a loop, lift the thread up from below.
Pull the loop with your fingers until the free end of the thread appears above the tooth plate.
Place both threads diagonally under the sewing foot to the back.
Filling the File
Lift the sewing foot and turn the handwheel until the needle reaches its highest position. Unscrew the handwheel isolator (center of the handwheel) by turning it towards you with your right hand, while holding the handwheel with your left.
Move the winder arm to the left and remove the bobbin completely. Hold the handwheel and press the isolator button.
Stitch Length
The numbers 1 through 4 represent the length of each stitch in millimeters. The higher the number, the longer the stitch. Shorter stitches are used for thin fabrics, and longer stitches for thicker fabrics. The MICRO area is used for satin.
I always sew with a 3 stitch and use a 1 stitch for zigzag.
Turn the dial so that the desired length is located below the symbol. To shorten the stitch, turn the dial to a lower number. To lengthen the stitch, turn the dial to a higher number. The middle button is for standard front stitching; for back stitching, press the button (for the back).
Tension Adjuster
The tension adjustment indicator shows the tension of the bobbin thread and allows you to adjust it correctly for any stitch, depending on the thread and fabric being used.
Presser Foot Pressure Regulator
The pressure adjustment dial regulates the pressure exerted by the presser foot on the fabric. Maintaining the correct pressure on the fabric is very important so that it can be transferred evenly by the feed dogs.
Lower the presser foot before adjusting the pressure;
To increase the pressure, turn the dial to a higher number (for thicker fabrics);
To decrease the pressure, turn the dial to a lower number (for thinner fabrics).