Arduino Tutorial: Arduino-pull-up-resistor-Beginner Project
components list:
1) Arduino UNO or Nano 1 pice
2) Led 1 pice
3) Resistor(4.7k or 10k) 1 pice
4) Resistor(330ohm or 1k) 1 pice
5) Push Button 1 pice
6) some jumper wire
7) Breadboard 1 pice
8) 9-volt battery 1 pice
connection:
Connect the push button between Arduino pin 4 and 5volt with a resistor(4.7k or 10k), and other side connect GND.
led pin to connect with the resistor (330ohm or 1k) in Arduino pin 8.led negative pin connect GND.
code and circuit:
https://github.com/ahmokther/Arduino-...
----------------------------------------------------------------
Song: Jim Yosef - Link [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jim Yosef - Link | House | NCS - Copyright...
Download/Stream: http://ncs.io/LinkYO
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -