DIY Split Ergonomic Keyboard
I put together a Dactyl Manuform 6x7 (running QMK firmware). I used Gateron G Pro 3 Brown switches. Diodes are 1N4148. MCU was Arduino Pro Micro.
Keyboard Project
https://github.com/abstracthat/dactyl...
STL generator
https://ryanis.cool/dactyl/#manuform
QMK Firmware
https://qmk.fm/
Keymap Generator
https://config.qmk.fm/#/kbdfans/odin/...
=== Timestamps ===
00:00 Introduction
02:58 Enclosure Design
04:01 Assembly and Wiring
13:06 QMK Firmware Setup
17:00 Keymap Setup
24:36 Firmware Config
30:16 Firmware Flash and Test
34:32 Final Thoughts