STARLINE A9 REMOTE PROGRAMMING - QUICK AND EASY
The process of linking the STARLINE A9 alarm key fobs to the system. The key fob was ordered from AliExpress.
• Ионисторы и брелок STARLINE А9 _ АЛИЭКСПРЕ... - unpacking the package with the key fob
https://letyshops.com/r/aliexpress-ea... - link to the key fob
Excerpt from the StarLine Twage A9 Operation and Installation Manual:
A total of 4 key fobs can be programmed into the alarm system's memory. Key fob codes are programmed with the alarm system disarmed, following this procedure:
1. Turn on the ignition.
2. Press and hold the Valet button until the siren sounds four times.
3. To programme the primary key fob with a display, simultaneously press buttons 1 and 2 on the key fob. To programme the secondary key fob without a display, simultaneously press buttons 3 and 4 on the key fob. Successful recording of the first key fob into the system's memory will be confirmed by one siren chirp.
4. Repeat step 3 for all key fobs to be recorded. The interval between recordings of each key fob must not exceed 5 seconds, otherwise the alarm will automatically exit key fob recording mode. Successful recording of each key fob is confirmed by the corresponding number of siren chirps.
5. Turn off the ignition. Exiting the key fob recording mode will be confirmed by five flashes of the parking lights.
SMOOTHER ROADS TO ALL!!!
SUBSCRIBE TO THE CHANNEL!!!
#starlineA9 #keyfobregistration #alarm