Chamberlain 953EV Garage Door Opener Remote Programming Video
Programming/install your Chamberlain garage door opener Keychain Remote with Visor Clip (953EV/EVC) with this easy to follow video. LiftMaster remotes use the same programming steps. See chart below for extra information.
Get a Chamberlain 953EV remote RIGHT HERE!
https://amzn.to/2Lhb0rE
ID CHART
Color of Learn Button
Frequency
Number of Presses
Yellow
SEC+2.0 Tri-band (310Mhz, 315Mhz, and 390Mhz)(Rolling Code)
1
Purple
SEC+ 315Mhz (Rolling Code)
2
Red/Orange
SEC+ 390Mhz (Rolling Code)
3
Green
Billion Code 390Mhz
4
1. Take the visor clip off and use the clip to press the program button on the back of the remote until the LED light on the front of the remote turns on.
2. Press and release the learn button on the garage door opener motor.
3. Press and release the remote button you wish to program ___ times, as indicated above.
4. Press either of the other 2 buttons on the remote to exit programming mode.
5. Press the programmed button to test. The door should activate.Chamberlain 953EV 3 button visor style remote. Program three different Chamberlain remotes into one unit. Works on all Liftmaster, Chamberlain, Sears units from 1993 to present. Chamberlain 953EV 3 button visor style remote
Program three different Chamberlain remotes into one unit.
Works on all Liftmaster, Chamberlain, Sears units from 1993 to present
product substituted with equivalent Liftmaster professional unit
Longer range
LED signal
Easy programming
Includes Battery
If this video was useful please give me a LIKE!!
This video was edited with Wondershare Filmora