Homemade Sound-Reactive Lights with LED Strips
➡️10 High-Quality PCBs for $5: https://www.pcbway.es/
➡️Electronic Components: https://www.vistronica.com
In this project, we will assemble lights known as sound-activated lights. We can connect a large number of LED strips because the TIP35C transistor has a high current capacity (up to 25 A). The list of components used is below.
In an upcoming video, we will build the project on a prototype PCB using PCBWAY.
➡️ Electrical Schematic and Breadboard Diagram: https://drive.google.com/drive/folder...
➡️ Donations to cover my project expenses: https://www.paypal.com/donate?hosted_...
➡️ Facebook: / raom.electronica
➡️ Instagram: / raomelectronica
➡️ Electricity, Electronics, and Mechatronics Group: / 523663111800730
➡️ Materials:
Electret Microphone
(https://bit.ly/3ACVr4s)
5V Regulator (7805)
(https://bit.ly/2VRanN4)
C945 Transistor
(Replacement transistor: BC558 (Change the connection on the breadboard) Verify the connection according to the transistor's terminals: https://bit.ly/3yMjXzs)
TIP35C Transistor, maximum current 25A
(Replacement transistor: TIP3055, maximum current 15A: https://bit.ly/3CObKx0)
LM358P Integrated Circuit
(https://bit.ly/3sgNkaB)
50kΩ Potentiometer
(https://bit.ly/3ACggNm)
5mm LED
12V LED Lights
(Small LED strip: https://bit.ly/37F261B)
(10-meter LED strip: https://bit.ly/3iLhSyp)
2 x 10kΩ Resistors 1/4 W ohm resistor
1 x 1M ohm 1/4 W resistor
1 x 100k ohm 1/4 W resistor
1 x 1k ohm 1/4 W resistor
1 x 100 ohm 1/4 W resistor
(Pack of 600 resistors https://bit.ly/3AGYTes)
104 µF ceramic capacitor (0.1 µF)
(https://bit.ly/3CLY8T5)
1000 µF 25V electrolytic capacitor
(https://bit.ly/3xHnyNR)