GhostArk EMF issue and shielding fixed
In my other video you can hear the "buzzing" sound this device was constantly giving off and if you noticed, the top LED lights were always at max or just below it and the EMF gauge read anywhere from 3-5 milligauss.
Part of the issue is the EMF sensor was touching the main board so all I did was pull it up approx. 2mm and that fixed the false EMF reading, but when I opened up the device the first thing I noticed was the shielding was only held on with one piece of tape and the rest was bending up and not shielding the internals as should be. My reason for getting into the device was to look at the antenna connection to determine if there was something I could do to enhance its reception.
Inside the device the antenna connection is fine, but with further inspection of the antenna that came with it, there is no connection from the 3.5mm male to the actual telescopic antenna at all. By just simply using a long 3.5mm male to 3.5mm male cable gave the device more than adequate antenna surface area, but it only helped with reception maybe 20-30% so the radio's reception is more controlled in the tuner than anything else.