Making my keyboard sounds better | DIY Sound dampening | ID80 v1 Mods (Akko CS Ocean Blue)
The process of making my old Idobao ID80 v1 less hollow and sounds a lot better by using just Foam, Masking Tape and Lube
For just the sound test: • Idobao ID80v1 with Lubed Akko CS Ocean Blu...
The before sound test was the stock board. I only added switches and keycaps without modding anything.
Keyboard review: https://drive.google.com/drive/folder...
(I will slowly make a written review of all the keyboards I have tried and owned)
_____________________
✓ Timestamps:
0:00 Stock sound test
0:50 Hollow sound
1:05 Start the disassembly
4:06 Testing out ways to reduce reverbs by filling between pcb and plate
4:33 Settle with using Masking Tape
6:02 Clip and Lube Stabilizers
8:21 Switch choice
8:44 Assembling the board
11:52 Tempest Mod
12:17 Test after modded
13:20 Comparison of Tempest mod before and after
14:49 Final Typing Test and Comparison
17:10 Outro
_____Specs:_______
› Board: Idobao ID80v1
› Plate: Integrated Alu Plate
› Switches: L&F Akko CS Ocean Blue
› Stabs: Lubed and Snipped included PCB snap-in stabs
› Tempest Modded (Masking Tape under pcb) and between pcb and plate
› Keycaps: ePBT ABS Dolch from KBDfans
› Deskmat: Masterpiece Deskmat (Endgame)
_____________________
✓ Gear used: Rode NT1-A with Scarlett Solo Gen 3
Mic is positioned roughly 12 inches above the board
_____________________
✓Music used:
👉 Composer: 龍崎一 （リュウザキハジメ)
https://dova-s.jp/_contents/author/pr...
🔵 Orange
› https://dova-s.jp/bgm/play14881.html
🔵 Café Au Lait
› https://dova-s.jp/bgm/play14853.html
🔵シェイクスピアの誘惑
› https://dova-s.jp/bgm/play11685.html
🔵 バランスボール・エブリデイ
› https://dova-s.jp/bgm/play12918.html
👉 Composer: Flehmann （フレーマン）
🔵 星が帰るとき
› https://dova-s.jp/bgm/play14756.html
👉 Composer: table_1 （テーブルワン）
https://dova-s.jp/_contents/author/pr...
🔵 A!OH!(1chorus_ver.)
› https://dova-s.jp/bgm/play14523.html
✓ License: https://dova-s.jp/_contents/license/
_____________________
👉 Please do note that the sound of the board may vary, depending on the surroundings (Table top material and thickness, number of deskmat, mic position, and type of mic). I tried to my best to recreate the most accurate sounding of the board in my environment.