DIY / I made my own vanity
Don't forget to share if you liked this video ;)
I bought the wood already cut, but we made a few small cuts at the end.
I bought it pre-cut, but we ended up making some small cuts. For the table:
1 piece 180 x 40 cm
Mirror frame:
2 pieces 180 x 10 cm
2 pieces 70 x 10 cm
For the mirror edges:
2 pieces 180 x 6 cm
2 pieces 90 x 6 cm
Tools: Drill and jigsaw
Materials:
40, 60, 80, and 220 grit sandpaper
1500 grit wet/dry sandpaper for polishing after the 3 coats of lacquer
Aerial socket
LED bulbs
Twin cable
Screws of different sizes
Flat and angled reinforcing plates
Switch and plug
1/2-inch wall plugs
1/4 x 2 screw heads
Angle brackets for the shelf
Wood glue
Lacquer and acrylic thinner
Washing cloth
Microfiber cloths
Triz
Silicone for Furniture
Mirror
Silicone for mirrors
Mirror hanging plates
***Welcome to your channel "NovedadesconKatherine"***
I hope to see you on my social media to get to know each other better ;)
Facebook Page: / 406276562765116
Want to see photos?
Follow me here: / novedadesconkatt
Visit my other channel: / @katherinemakeup1
MY DAUGHTER'S CHANNEL: / dropksergio
CONTACT: [email protected]
What editor do I use?
Corel Video Studio X9
Want to donate to the channel? Thanks :)
https://paypal.me/katperu?locale.x=es_XC
Thanks for watching this video. Any suggestions or requests, please let me know in the comments :)