Radial Insertion Machine
360 Degrees Insertion Angel
Radial: Insertion heads are servo-driver for precise and rapid component insertion. The insertion tooling may be rotated from 0 degree to 360 degrees in 1 degree increments.
2.5mm Span Standard Configuration
Achieves High Density for tight LED & small applications.
2.5mm span guide jaw with minimal width.
- Inward clinch option to increase bottom side density
- Prevents shorting during wave soldering.
Special asymmetric angles are also available on request.
20 stations feeder module
Flexible add-in of feeder module
Taped raw material supply is required
Special designed component clips for transportation
Long lifetime material
Motion driven by Servo motor & toothed belt
Programmable insertion angle in 1°increment
Min board size in 50 x 50mm &
Max board size in 450 x 450mm(Off-Line)
Max board size in 285 x 400mm(In-Line)
Board thickness in 0.79-2.36mm
Available of In-Line conveyor track, capable to process with upstream & downstream machines
Upstream & Downstream SMEMA communication
Process width in 50~285mm adjustable
Option of PCB loader & unloader
Programmable work table in rotary of 0°,90°,180°&270°clockwise or counter clockwise
Guide pin style board positioning structure
X , Y axis driven by Servo motors
Hardened & special treatment of Cut & Clinch blades with excellent lifetime
Selectable lead length in 1.2/1.5/1.8mm
Clinch angle in 10-35°
Broken lead collection structure
Up & Down motion driven by pneumatic cylinder
Max Lead Diameter in 0.6mm
High resolution with 256 gray scale industrial camera for component position teaching
Close loop Self alignment of component position
Multi style programming capability
Direct conversion from Gerber file Excel format
On-line teaching by vision camera
Off-line programming by board scanner
Required to feed with taped raw materials
Production Under Control And Stability Of Product Yield
Protected Product Quality
Maximum component height of 28mm and diameter of 13mm
Lead Span of 2.5 & 5.0mm / 7.5 & 10.0mm
www.allaismt.com