Modular GE Universal Formwork , PASCHAL Training in Saudi Arabia Jubail Azmeel Contracting
The Modular formwork has a flat steel frame. The
max. panel width is 100cm. The panel heights are
62.5cm, 75cm, 125cm and 150cm. Further
dimensions see pages 6-15.
The frame has a depth of 7,5cm and a thickness of
6mm. The plywood is supported by horizontal and
vertical girders. The girders are welded in a distances
of 25cm.
The assembly instructions refer to standard
executions with a maximum safe working pressure of
35kN/m² in compliance with DIN 18218.
The maximum pressure is applicable over the whole
panel height without affecting the tolerances for
deflection according to DIN 18202, table 3, line6.
As tie rods, only DW15 according to DIN 18216
should be used.
All applications surpassing these limitations
necessitate a statically verification.