Hemming trousers with a cuff
Hello, today I'll show you how to shorten elegant men's trousers with cuffs and tape. Measure the length you need to shorten, fold the leg seam to seam, and press. Mark 10 cm apart. As you'll notice, in this case, we're marking the right side of the trousers, not the wrong side. Draw a line, then transfer the marks to the other side of the leg and draw the same line. Make the cuff 3 cm wide, depending on the client's preference. Mark 3 cm under the main line twice, and another 1 cm under the tape, making a total of 7 cm for the cuff. Draw lines on both sides of the leg, trimming any excess fabric. Using pins, fold the fabric where you'll be sewing the tape and press. Don't forget to iron the tape to shrink it. Let's move on to the sewing machine. Only on one side along the inner seam of the trousers, rip the thread. In order to insert the tape there. Sew under the lining, applying the tape to the ironed line. Set the speed to medium, step 3.5, 90-ta needle, number 40 thread in the bobbin and from the top in the color of the fabric. Stitch around the entire circle of the leg. Cut off the excess tape. Then connect the two seams, stitch. Here's what we got. Move on to the ironing board. Turn the trousers inside out, iron the seam, pin with needles in 4 places focusing on the drawn line, then iron and go stitch. We lay the line along the very edge of the tape, starting and finishing from the inner seam. When stitching, the leg must be kept taut. It remains Secure the cuffs on both seams. Try to stitch the stitch directly into the seam so the cuff is not visible. Cut the threads and repeat along the other seam. To iron evenly, use pins and pin in four places. Iron well and you're done. Now you've learned how to shorten trousers with a cuff. Thank you for your attention, and subscribe to my channel for more interesting information. See you soon.