commercial metal roofing standing seam Mississippi | 601 212 5433
601 212 5433 https:metal-roofing-contractors.com
/ watchv=kkkwnrjvvd0&list=pl34ss60xg-s5z0yfj...
1. DESIGN INTEGRITY
CMS begins and ends in the high, reducing the risk of leakage at the rake that can occur when
finishing in the low. The panel seam is sealed with a factory-applied hot-melt mastic, a superior grade to mastics
applied in the field.
2. FLOATING ROOF
The roof was designed to cope with the forces of expansion and contraction. This is accomplished
by allowing the panels to freely move up and down the roof slope. Due to this design feature, the system offers no
diaphragm capabilities or purlin stability.
3. CLIP SELECTION
A large selection of clips is available for various types of construction.
4. UL CLASS 90 RATING
CSMI’s roof system has 10 different UL Class 90 construction numbers, each of which is available
with several options.
5. FIRE RESISTANCE RATINGS
The roof system qualifies for use in several UL design assemblies and carries a UL “Class A” fire rating.
6. SIMPLICITY
No field seaming is required. The panels simply snap together forming a self-locking seal.
7. FLEXIBILITY
CMS roof system offers welcome flexibility to the erector. Wall covering can be erected before or
after the roof is installed. Panel installation is an uninterrupted procedure.
8. EASE OF INSTALLATION
The erector has the option to install each side of the roof separately or both sides simultaneously, which greatly
increases the speed and convenience of erection. Being reversible end-for-end, sheets do not have to be special
ordered for each side of the building. No field notching of panels at endlaps or ridge is required.
9. FORGIVING SYSTEM
The system design allows for the roof to be finished in the “high” when an out-of-square condition or
other factors cause the roof to terminate up to 4” from the steel line.
10. BUILDING LENGTH
Odd, as well as even, footage buildings can be terminated at a major rib with the use of our 12” and 18” panel or at
other odd widths by field bending the panel.
11. PREPUNCHED PANELS AND COMPONENTS
CSMI’s prepunched system, combined with self-engaging back-up plates, assures panel module and speeds roof
installation.
12. DURABILITY
Every unpainted panel is manufactured from galvalume ..
COLOR AND FINISHES
is available in a wide variety of popular colors in two different paint systems. Please contact CMS
for color availability and lead times.