Build your own SilverHat DCC Booster (Video
I have finally released the Arduino sketch for the SilverHat booster, so it’s time to show you how you can build and configure this booster for yourself. It's simple. Even Electronics Novices can do it.
If you like my work, please consider supporting it with a donation:
https://www.paypal.com/biz/fund?id=Y2...
SilverHat Arduino Firmware:
https://github.com/tanner87661/Silver...
xLoader Softwatre for loading HEX files to Arduino:
https://github.com/binaryupdates/xLoader
SilverHat Configurator:
https://github.com/tanner87661/Silver...
Tindie page for IoTT Stick, Interface Boards and Function Hats: https://www.tindie.com/stores/tanner8...
Tinkercad repository for IoTT Cube frames:
https://www.tinkercad.com/dashboard?t...
MyIoTT.org (landing page under construction): http://myiott.org/
Table of Content
0:00 Start
0:17 Welcome
0:34 SilverHat Versions
1:23 Required components
1:50 Command Station vs. Booster
3:50 DIY Build Start
4:00 Download and install SilverHat firmware
5:10 PowerShield Configuration and Installation
6:35 Recommended pin assignment
8:35 SilverHat hardware configuration
11:00 Connect Power Supply
11:57 Short circuit test
13:00 Setting current configuration
15:30 Track monitoring
17:40 Track current ON and overload test
18:55 Stand-alone operation
20:34 Conclusions