CONDUCTOR OF THE SECOND VERSION
You can order 16mm and 18mm jigs here: http://voltnik.ru/konduktor. This is an improved jig model for assembling laminated chipboard furniture. Printing was done with KREMEN plastic: https://kremen.ru/ on a TwoTrees Sapphire Plus 3D printer: • COREXY 3D ПРИНТЕР ДЛЯ ИЗБРАННЫХ - TWO TREE...
The 16mm and 18mm jig model is here: https://www.thingiverse.com/thing:522...
Jig from AliExpress: http://alli.pub/6anzps
For any board width: http://alli.pub/6anzpz
The jig is designed for 5x50 Euro screws, which are less damaging to laminated chipboard than 6x50 and 7x50. To assemble the jig, you'll need two 8mm guides; aluminum tubes are the cheapest option. The drill hole is 3.5-4.0mm.
Printing parameters:
Plastic: PETG! It holds its shape better when heated by a drill.
Thickness: 0.2-0.3mm
Bottom/lid/wall: 4 contours
Infill: 20-30%, grid template
Weight of two jigs and the center section: approximately 150g
♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
ALIEXPRESS: http://voltnik.ru/aliexpress
BANGGOOD: http://voltnik.ru/bngd
♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
✔ Channel website: http://voltnik.ru/
✔ Yandex.Zen: https://zen.yandex.ru/voltnik
✔ VK: https://vk.com/voltnik
✔ Telegram channel: https://t.me/voltnik_channel
✔ Telegram chat: https://t.me/voltnik_group
Timings:
0:00 - Introduction
0:23 - Why do you need a jig
2:09 - Modeling a jig
3:04 - 3D printing with KREMEN plastic
4:37 - Assembling jigs
5:16 - Assembly shelves using jigs
7:53 - Result