Attiny85_001
How many output pins does ATtiny85 have?
ATtiny85
The ATtiny85 requires an operating voltage between 1.8V and 5.5V and has 5 I/O (input/output) pins for connecting electronic components.
What are the pins of ATtiny 85?
ATtiny85 Microcontroller : Pin Configuration, Circuit & Its ...
The ATtiny85 microcontroller is a small 8-pin AVR controller. It has 8 I/O pins, in which 6 I/O pins are used for multiple functions and the other 2 pins are power pins used for VCC and GND. These 6 I/O pins are also known as PORTB pins, which are used as inputs or outputs based on the application
How much current does ATtiny85 use?
To be correct, the ATtiny85 must at least wake up every 8 seconds, running for at least 65 milliseconds and drawing around 2 mA current. This leads to an average current of 40 µA and 6 month. In this scenario, it makes almost no difference if your program runs for 10 milliseconds (every 8 seconds).
What is the maximum speed of ATtiny85?
The ATtiny85 is rated at a maximum clock speed of 20MHz at 4.5 – 5.5V
Does ATtiny85 have analog pins?
To add more confusion, the analog pins can have different numbers than the digital pins at the same physical location. This is happens with the ATtiny85. For example, the physical pin 7 is both the digital pin 2 and the analog pin 1. Digital pin 1 is the physical pin 6, and it has no analog input.
Which pins are PWM?
On an Arduino Uno, PWM output is possible on digital I/O pins 3, 5, 6, 9, 10 and 11. On these pins the analogWrite function is used to set the duty cycle of a PWM pulse train that operates at approximately 500 Hz2.
Does ATtiny85 support USB?
Description. A very small Arduino with USB that is very suitable for smaller applications! The nice thing is that the ATtiny85 can be programmed without needing another Arduino or a programmer. This is because USB software runs in the ATtiny85 itself.
Does ATtiny85 have EEPROM?
ATtiny85 has 3 built-in memories associated with it, which are as follows: It has a flash memory of 2096 bytes. EEPROM memory of ATtiny85 is 512 bytes. It has 32 general purpose registers as well
Is ATtiny85 a microcontroller?
The ATtiny85 AVR is a RISC-based microcontroller in an 8 pin DIP microcontroller. The device achieves a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.
What is the analog output of ATtiny85?
ATtiny85 microcontroller tutorials, Part 6: LED intensity ...
The pot will give an analog output of 0 to 5V. ATtiny85 has an inbuilt ADC with 4 input channels and 10-bit resolution. ATtiny85 will take analog input from the pot and generate PWM output to vary LED intensity.
Does ATtiny85 have I2C?
ATtiny85 I2C protocol tutorial - Gadgetronicx
ATtin85 microcontroller is equipped with Universal Serial interface aka USI which can be configured to operate in I2C mode. I2C mode using this USI interface is also referred as Two wire mode
What can ATtiny85 be used for?
ATtiny85 microcontroller is a small & high-performance based AVR microcontroller and it uses a RISC CPU. This microcontroller is available in two packages which are mainly used for interfacing & controlling between different sensors & devices