4 way fuse box without led
Fuse Block Specs:
Circuits: (4) #8 screw terminals
Inputs: (1) #10 stud
Negative Bus: No
Max Current: 100A total, 30A per circuit
Max Voltage: up to 32Vdc
Fuse Type: ATC or ATO
4 Circuit Fuse Block Use Example:
This would be a great choice for a smaller boat with just a few unswitched loads. Or even a great breakout point for several, individually fused loads on a common circuit.
For example: Maybe you have four expensive underwater lights, all thrown by a single switch on your marine switch panel. Combined they need a 15A, or 20A breaker on the panel… but you want to circuit protect each one at only 3A to protect them. You can run your lead from the switch to the input of this block, then slap four 3A fuses into this thing out to your lights. Now all your lights are controlled with a single switch, but this fuse block protects them individually down to their rated current.
Our company website:https://www.yujiepower.com/dual-usb-c...
Alibaba link:https://yuchengoutdoor.en.alibaba.com...
We have passed the TS-16949 certification, CE certification, UL certification, ISO-9001 certification, Chinese CCC authentication, ROSH certification, etc.
We cooperate with Toyota, Toshiba, Sharp, Suzuki, and a lot of famous companies around the world.
Compact quality, and well built. Common size fuses are easy to buy, anywhere.
This is a perfect bus bar to extend 12v power to another location and provides 4 fused circuits. It has a nice cover that snaps on nicely to cover terminals. Very compact and can be mounted horizontally or vertically without any issues. Tabs breakaway to allow source power cable to be setup at 3 out of 4 90 degree positions. Fused circuits are limited to just one side with the fuse on the other. Labels come with bus bar.
Fuse Blocks are an effective method of protection to prevent damage to wiring and possible fire in the event of an over-loaded or short circuit. This Blue Sea Systems space-saving fuse block can provide protection for new installations or when the panel has run out of breakers. Often used for electronic installations, these fuse blocks can be fed by one breaker from the distribution panel and supply power to 4 additional circuits. Terminals are located on one side to concentrate wiring and minimize the overall footprint of the fuse block.