Autodesk Powermill Exercise - Drilling 5
#autodesk #powermill
Create drilling toolpath in Autodesk Powermill
Assembly modelling in Solidworks
00:01 - 00:04 Intro
Assembly modelling in Solidworks
00:19 - 00:35 Create datum
00:38 - 01:10 Insert 3D model bracket & mate/constraint
01:17 - 01:33 Datum check
01:47 - 09:00 Insert jig/vise & assembly with 3D model bracket
09:01 - 09:16 Save assembly into STEP AP214
CAD/CAM programming in Autodesk Powermill
09:25 - 09:57 Insert STEP file to Autodesk Powermill
09:58 - 10:25 Datum is already at center
10:32 - 12:03 Create Block
12:17 - 16:48 Create Cutting Tools
17:42 - 20:10 Create Hole Feature Sets
20:11 - 22:10 Create Centerdrill Toolpath
20:26 - 23:45 Create Drill 7 mm Toolpath
23:52 - 22:49 Create Drill 5.5 mm Toolpath
24:57 - 25:52 Create Drill 12 mm Toolpath
26:14 - 27:26 Create NC Program
27:30 - 28:26 Drilling Toolpaths Simulation
28:57 - 31:37 Create Milling Toolpath
32:01 - END Drilling & Milling Toolpaths Simulation
Previous video : Solidworks Training - Part Modelling for CAD/CAM - 001 : • Solidworks Training - Part Modelling for C...
------------------------
SOCIAL MEDIA
Instagram : @warkop3ddesign
Grabcad Community : https://grabcad.com/warkop.3d.design-1