Fusion 360 Project | Designing Complete Drone | Tutorials for beginners
welcome to @tech_trifecta!
In this video series we will design quad copter drone chassis step by step by using Fusion 360.
1. Sketching Battery packs spacing ( • 1.Fusion 360 Project | Designing Complete ... )
In this video we will learn:
a. How to start sketching in Fusion 360.
b. Sketch construction geometry.
c. Create dimensions.
2.Front profile sketch ( • 2.Fusion 360 Project | Designing Complete ... )
In this video we will sketch front profile of quad copter. you will learn:
a. How to make tangent arc.
b. How to create dimension.
c. Construction geometry.
3.Creating complex geometry ( • 3.Fusion 360 Project | Designing Complete ... )
You will learn:
a. How to create construction geometry.
4.Top-down sketch ( • 4.Fusion 360 Project | Designing Complete ... )
You will learn:
a. How to create sketch mirror.
b. Sketch offset.
c. Project sketch
5.Finalizing the sketching ( • 5.Fusion 360 Project | Designing Complete ... )
you will learn:
a. How to create mirror sketch.
b. How to link dimensions.
c. How to project sketch.
6. Creating Solid Body
You will learn:
a. How to create extrude surface.
b. How to create offset surface.
c. How to extrude body.
7. Propellers Protection 1 ( • 7.Fusion 360 Project | Designing Complete ... )
You will learn:
a. How to create extrude surface.
b. How to create surface loft.
c. How to create surface trim.
8. Propellers Protection 2 ( • Fusion 360 Project | Designing Complete Dr... )
You will learn:
a. How to extend surface.
b. How to split body.
c. How to remove body.
Short Cuts Used:
1.For "Dimension tool": Press 'D' on keyboard
2.For converting solid line to construction line: select line first and then press 'X' on keyboard
3.For getting "line tool" : Press 'L' on keyboard
4.For getting "circle tool" : Press 'C' on keyboard
5.To leave any tool: Press 'Esc' on keyboard
6. Undo any step: Press 'Ctrl+Z' on keyboard
7.To save file: Press 'Ctrl+S' on keyboard
#CADmodeling
#DroneDesign
#Fusion360
#DIYDrone
#UAV
#3DModeling
#Engineering
#Design
#Tutorial
#HowTo
#Beginner