Setting The Input Level on Mimeophon
If your input signal is particularly low- or high-amplitude, you may want to adjust the input gain of the Mimeophon. You may attenuate or amplify, or neither (the default is Unity gain, which works with most modular level signals).
To set the input gain level, set MIX to fully Dry (counterclockwise), and monitor your input signal. Hold down the FLIP and HOLD buttons to cycle through four options for input gain level. The currently selected option will be displayed via the color of the ZONE Window as follows:
BLUE -3dB
GREEN 0dB/Unity
ORANGE +3dB
RED +6dB
Monitor the input signal while selecting input gain level to hear the effect of the selected level. Release both buttons to select and exit.
Note: Boosting input gain may result in input clipping on typical modular level signals. In most cases we recommend keeping this setting at Unity unless a boost or cut is necessary.
For more information on gain staging see the Morphagene Science video on this topic: • Morphagene Science: Gain Staging and Input...
http://www.makenoisemusic.com/modules...