How to Create Gravity System part List In Civil3d Part 37
https://dai.ly/x90vj4c
https://dai.ly/x90vkj4
To create a *gravity system part list* in **Civil 3D**, you can follow these steps:
1. *Open Civil 3D and Start a Drawing*
Launch Civil 3D and open the drawing where you want to create the gravity system part list.
2. *Access the Pipe Network Tools*
Go to the *"Home"* tab on the ribbon.
Under the *"Create Design"* panel, click on the *"Pipe Network"* drop-down and select **"Parts List"**.
3. *Create a New Parts List*
In the *"Network Parts List"* dialog box, click the *"New"* button to create a new parts list.
Provide a name for your parts list (e.g., **Gravity System Parts List**).
4. *Add Parts to the Parts List*
After creating the parts list, go to the *"Pipes"* and *"Structures"* tabs.
Click on the *"Add Part Family"* button to add families of pipes or structures.
You can add different types of parts (e.g., concrete, PVC, HDPE pipes, or manholes, catch basins, etc.) based on your gravity system needs.
5. *Configure Part Sizes*
For each part family, you can define the available sizes and materials by editing the properties in the *Parts List* dialog.
Select the desired sizes, materials, and any other relevant properties that align with the specifications of your gravity system.
6. *Set Up Default Rules*
In the *Parts List* dialog, under the *"Rules"* tab, set up design rules for your gravity system (e.g., minimum and maximum cover, slope ranges, etc.).
These rules will be used when creating the network to ensure the gravity system complies with design standards.
7. *Save the Parts List*
Once you've added all the necessary parts and set up the rules, click *"OK"* to save the parts list.
You can now use this parts list when creating pipe networks for gravity systems in your drawing.
8. *Apply the Parts List*
When creating a pipe network in Civil 3D, you can select this newly created parts list as the default parts list.
Go to the *Pipe Network Creation Tools* and choose the gravity system parts list from the drop-down when creating pipes and structures.
By following these steps, you'll be able to set up and use a custom *gravity system parts list* in Civil 3D.