Tech Tip: How to Remove a Spark Plug Wire
Video tech tip on how to remove a spark plug wire on an engine. This applied to all types of spark plug wires found on vehicles, recreational vehicles, small engines, etc. Although procedures for coil packs which are directly mounted on the spark plug may vary between makes and models. It is very important to take care when removing a spark plug wire as it can be easily damaged, therefore requiring a replacement. Replacements can be expensive, especially if they are only available in a set.
Website: http://4diyers.com
Facebook: / 4diyers
Google Plus: https://plus.google.com/+4DIYers
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-none
Procedure:
-first locate the spark plug wire which you would like to remove
-ensure you are able to gain access to the boot of the spark plug wire
-do not pull the wire portion as you can damage the wire which in turn will require a replacement
-grab firmly onto the spark plug wire boot, then twist in either direction and pull off simultaneously
-this ensures the wire will break free is slightly corroded
-the rotation also allows for the connection to unclip from the top of the spark plug much easier, putting less strain on the wire
-it is normally recommended to apply dielectric grease to the terminal on the top of the spark plug to prevent corrosion and sticking
-to reinstall the spark plug wire, just simple push firmly back into place until you either feel or hear a clip
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.