🔵 How To Scan MultiTV Channels On SuperBox Decoder | Pbteck
How To Scan MultiTV Channels On SuperBox Decoder
To scan MultiTV channels on a SuperBox decoder, follow these steps:
1. **Connect the Decoder**:
Ensure the SuperBox decoder is connected to your TV and that both devices are powered on.
Connect the satellite dish coaxial cable (usually from the LNB on your dish) to the satellite input on the decoder.
2. **Access the Settings Menu**:
Use the SuperBox remote to go to the main menu.
Look for an option labeled *Settings* or *Installation* (the exact name may vary depending on your SuperBox model).
3. **Choose Satellite Setup**:
In the *Installation* or *Settings* menu, find and select *Satellite List* or **Satellite Setup**.
Look for *MultiTV* in the satellite list. If it’s not listed, you may need to manually add it:
Choose *Add New Satellite* and input *Orbital Position: 28.2°E* (since MultiTV channels are broadcast from Astra 2F at 28.2° East).
4. **Configure LNB Settings**:
Set the *LNB Frequency* to *9750/10600* (for Universal LNB) if it is not already set.
Make sure *LNB Power* is set to **ON**.
5. **Scan for Channels**:
After setting the satellite, go back to the installation menu and select *Blind Scan* or **Auto Scan**.
This will scan for all available channels on the MultiTV satellite.
Allow the scan to complete, which may take a few minutes.
6. **Save Channels**:
Once scanning is complete, save the found channels. They will now be available in the channel list.
7. **Exit and Enjoy**:
Exit the settings menu and go to your channel list. You should now see the MultiTV channels available.
If you encounter issues with signal quality or the channels aren't displaying, ensure the dish is correctly aligned and that the LNB settings are correct.
_____________________________________
LINKS
Visit The WEBSITE for more Info:
https://www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
https://t.me/pbtecknology
PBTECKNOLOGY
/ pbtecknology