🔵 How To SCAN MultiTv / Satellite Channels Channels ON AMCON Satellite TV | Pbteck
How To SCAN MultiTv / Satellite Channels Channels ON AMCON Satellite TV
To scan MultiTV or other satellite channels on an Amcon Satellite TV, you can follow these steps to set up and scan for available satellite channels:
Step 1: Connect the Satellite Dish
1. Ensure your satellite dish is properly aligned and connected to your Amcon TV.
2. Connect the coaxial cable from the satellite dish to the *SAT IN* or *LNB IN* port on the back of your TV.
Step 2: Switch to Satellite Input
1. Turn on your Amcon Satellite TV.
2. Use the *Input* or *Source* button on your remote to select *Satellite* or *SAT* mode as the input source.
Step 3: Access the Satellite Settings Menu
1. Press the *Menu* button on your remote to open the settings menu.
2. Navigate to *Satellite Settings**, **Channel**, or **Installation* (menu options may vary by model).
3. Select *Satellite Setup* or *Dish Setup* to access the satellite configuration options.
Step 4: Configure Satellite Settings for MultiTV
1. In the satellite setup menu, select *MultiTV* or manually enter satellite details:
**Satellite Name**: Choose the satellite your dish is aligned to (for MultiTV, this is usually **SES 5 at 22.0°W**).
*LNB Frequency**: Set to **9750/10600* MHz.
*Transponder Frequency**: Enter **12522 MHz* with *Vertical* polarization and a *symbol rate* of **30000 KS/s**.
2. Ensure that the signal strength and quality bars indicate a strong signal. If not, adjust the satellite dish or call a technician to align it properly.
Step 5: Scan for Channels
1. After setting up the satellite configuration, select *Blind Scan* or *Auto Scan* to search for channels.
2. Wait for the scan to complete; this may take several minutes as it searches for and saves available channels.
Step 6: Save Channels and Exit
1. Once the scan is complete, the TV will automatically save the channels.
2. Press the *Exit* button to return to the main viewing screen.
3. Use the *Channel* buttons on your remote to browse through the saved satellite channels.
Additional Tips
**Signal Quality**: If some channels aren’t clear, check the dish alignment and adjust if necessary.
**Periodic Rescanning**: Perform a scan periodically as new channels may be added.
**Factory Reset**: If the settings seem incorrect, try resetting the satellite settings and repeating the setup.
Following these steps should allow you to access MultiTV and other satellite channels on your Amcon Satellite TV.
_____________________________________
LINKS
Visit The WEBSITE for more Info:
https://www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
https://t.me/pbtecknology
PBTECKNOLOGY
/ pbtecknology