Assembly: S-Dome 10°
Stephan shows you the construction of the S-Dome mounting system step by step with the long and short rails.
▶ 0:02 #S-DomeClassic10° Mounting with short and long rails (elevated on one side)
▶ 0:07 Introduction Stephan Klopfer from K2 Systems
▶ 0:27 Attaching building protection mat to long rail
▶ 0:37 Place MK2 insert nut in the rail
▶ 0:42 Screw the Dome SD to the rail
▶ 0:48 Attach dome 1000 to the rail
▶ 1:00 Mount flat connector
▶ 1:10 S-Dome 2.0 short rail
▶ 1:17 Apply module and fasten with module clamps
▶ 1:35 Assemble windbreaker
▶ 1:47 Attach SpeedPorter for ballasting
▶ 1:57 Additional options for ballasting
▶ 2:07 Assembling S-Dome Classic 10° with Long and Short Rails
▶ 2:12 Goodbye and contact K2 Systems
The solution for #single-sided elevation
The S-Dome system is suitable for nearly all types of #flatroofs. It is very easy to install using fewer K2 System components.
A system for structurally challenging roofs with limited ballast options
Aerodynamically optimised as a result of wind tunnel testing
Quick and easy handling
Also available as a short rail system
More of the flat roof system: https://k2-systems.com/en/products/s-...