K2 D-Dome systems: Routing module cables
See our recommendation for the laying of #modulecables for double-sided flat roof systems from us. This applies to #D-DomeV and #D-DomeClassic.
▶ 0:02 Introduction: Laying modular cables, special features of double-sided flat roof systems and use of the Cable Manager
▶ 0:10 Introduction Axel Klett from K2 Systems
▶ 0:18 Implementation with Cable Manager
▶ 0:40 Tip if the cable is too long
▶ 1:12 Source of error: positioning of the Cable Manager
▶ 1:24 Classic wiring of the modules (east module to east module).
▶ 1:33 Use of a cable extension
▶ 1:46 Tip: Grab the cables already when inserting the module.
▶ 1:57 Tip: Place modules in pairs
▶ 2:19 Lock cable extension to module and attach slip-on cable tie
▶ 2:51 Mounting the cable extension on the side of the module frame (with Cable Manager)
▶ 3:46 Fixing the cable to the module using Cable Managers
▶ 4:00 Pre-sorting and pre-fixing cables
▶ 4:09 Connecting negative and positive poles
▶ 4:33 Tip: PVX Multimount with integrated ballast for secure placement of cable harnesses
▶ 5:03 Goodbye and contact K2 Systems
• Special features of double-sided flat roof systems
• Correct use of the Cable Manager (cable clip)
• Connection of module rows
• Use of PVX Multimount with wire basket ducts or mesh cable trays for collection of cable harnesses
-- Demo • PVX Multimount · Kabelmanagement mit Kabel...
-- More https://k2-systems.com/en/news/detail...
You will find these accessories in our catalogue
https://k2-systems.com/en/catalogue
Cable Manager and PVX Multimount can be supplemented directly with K2 Base, our free online planning tool for your PV projects
-- Register now https://base.k2-systems.com/#!/signup