How to install Fits Mansfield 2" Toilet Tank to Bowl Gasket Kit | Korky Toilet Repair
Fits Mansfield 2" Toilet Tank to Bowl Gasket Kit install by Korky
Hello and Welcome to Korky Toilet Repair. Today we are going to install your new Fits Mansfield 2" Toilet Tank to Bowl Gasket Kit. The first step is to shut off the water supply to your toilet. Then flush and hold the lever down to drain the water from your tank. Sponge out the remaining water in your toilet tank. Place a bucket underneath your toilet tank to catch any excess water. Disconnect your water supply line. Locate and remove all old nuts, bolts, and washers from the toilet tank. Carefully lift up on the tank and remove it from the bowl. Remove the old tank-to-bowl sponge gasket and place your new Mansfield gasket over the mounting nut threads. Carefully set the tank back down onto the bowl. Use the bolts, rubber washers, washers, and hex nuts, to attach the tank to the bowl. Apply downward pressure to keep the tank level as you tighten the nuts in an alternating fashion until the tank is stable. Do not over tighten the nuts; doing so may cause the porcelain to crack. Reattach the water supply line. Turn the water supply on to complete your installation. Congratulations, you have successfully installed your new Fits Mansfield 2 inch Toilet Tank to Bowl Gasket Kit.
Thank you for choosing Korky.
If you need further assistance, please visit our website or call us at 262.763.2434